Refinishing a hardwood floor is what comes to your mind once you complete your purchase of hardwood floors. How much does it cost to refinish hardwood made floors, is what you think again and again. After making an expensive purchase once again investing on it, is something which no one would want. Then refinishing also needs to be done.
Refinishing hardwood made floors without sanding is what I am talking about. Sanding is indeed an expensive process which not only involves the cost for the polish but also has an additional cost of professional labor which comes along with it. So, opting for an alternative to sanding as long as your hardwood floor is concerned is no bad choice you are making.
Going by the easier way: refinishing the floors
When you have already decided it is the cheaper way that you are going to take. While refinishing your hardwood made floors this time round. Then it is best to avoid sanding. Starting from curing to buffing to putting that last coat with the hardwood finisher like polyurethane.
You can do everything on your own. Saving that hefty amount you can now get your requirements shopping done in one of your nearest local hardwood dealer’s or hardware shop. Once you get all your things. Refinishing hardwood made floors without sanding following a few instructions can give the perfect professional touch to your floors.
Carefully try to inspect the wood first to check for holes. If you find any hole, use a wood filler to fill them. Then you must carefully rub off all the dust from the surface of the hardwood floor. Refinishing hardwood floors is not that a problematic work but then doing it correctly with precision is all you need to get the desired results.
Coming back to the refinishing part again; it is curing the holes, or getting their colors matched with the color of the hardwood surface is what has to be done. Once you are done, it is time for you to relax until you go for the last few steps, which is only when the color has dried off. Refinishing hardwood floors without sanding.
After your floor has completely dried up it is time for buffing using the buffing machine or more conveniently sand paper. It is now time to coat gently the whole hardwood floor surface using polyurethane.
The coating must not be thick and has to be done using very soft strokes. It is only after twelve hours or the sooner the surface is dried that you can bring back all your furniture and use the floors like before. Refinishing hardwood floors without sanding is indeed one of the most convenient procedures for all of us.